Offline Data Retrieval

You will need a device that can connect to the air monitors Wi-Fi and has a browser. This could be a tablet, phone or computer.

  1. Press and hold the access point button on the bottom of the unit by the mount until the ring light comes on around it. This usually is about 3 seconds.

  1. Connect to the AM-#### access point with your device. It is an open network with no internet connectivity some devices require you to confirm to keep the connection with no internet access.

  2. Scan the QR code next to the access point button with your phones camera app and open the webpage. Otherwise navigate your devices browser to 192.168.0.1 or 192.168.0.4 .

  3. The air monitors webpage will pull up sometimes this can take a up to a minute, the closer to the monitor you are the better the signal.

  4. On the right hand side or the bottom (depends on screen size) has the buttons to download the data and clear the data. After clicking download button the file will be handled by your browse.

     

    Different devices handle it differently but check your downloads folder. The download time will depend on the size and your connection speed.

  5. Once downloaded I can step you through converting the file into an CSV using our AM Desktop Utility. Download all the files in the field then once back in the office convert them or send them to me.

Back to blog